cloudy  trunk
 All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Friends Macros Pages
Data Structures | Functions | Variables
prt.h File Reference
#include "module.h"
#include "container_classes.h"
Include dependency graph for prt.h:
This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Data Structures

class  t_prt_matrix
 
struct  t_prt
 
struct  t_line_col
 

Functions

void PrtZone (void)
 
void PrtComment (void)
 
void PrtFinal (void)
 
void SetPrintLineCol ()
 
void prt_wl (FILE *io, realnum wavelength)
 
void sprt_wl (char *chString, realnum wl)
 
void prt_line_err (FILE *ioOUT, const char *label, realnum wvlng)
 
void prt_line_inlist (FILE *ioOUT, const char *label, realnum wvlng)
 
void PrtHeader (void)
 
void prt_LineLabels (FILE *io, bool lgPrintAll)
 
void prtmet (void)
 
void PrtMeanIon (char chType, bool lgDensity, FILE *)
 
double PrtLineSum (void)
 
void PrtLinePres (FILE *ioPRESSURE)
 
void PrtColumns (FILE *ioMEAN)
 
void CloudyPrintReference ()
 
void DatabasePrintReference ()
 
void PrtAllTau (void)
 

Variables

const long NCOLMAX =132
 
t_prt prt
 
struct t_line_col prt_linecol
 

Function Documentation

void CloudyPrintReference ( )

CloudyPrintReference print preferred citation to Cloudy

Definition at line 1781 of file service.cpp.

References fprintf(), Singleton< t_version >::Inst(), ioQQQ, mode_r, open_data(), and SafeGetline().

Referenced by PrtHeader().

Here is the call graph for this function:

void DatabasePrintReference ( )

DatabasePrintReference print some database references

Definition at line 1798 of file service.cpp.

References atmdat, t_atmdat::chVersion, fprintf(), ioQQQ, mode_r, open_data(), and SafeGetline().

Referenced by PrtFinal(), and PrtHeader().

Here is the call graph for this function:

void prt_line_err ( FILE *  ioOUT,
const char *  label,
realnum  wvlng 
)
prt_line_err produce an error message containing the line label and wavelength,
            followed, if given, by the wavelength of the closest line of the same label 
Parameters
*ioOUToutput file handle
*labelline label
wvlngline wavelength

Definition at line 161 of file prt.cpp.

References fprintf(), and prt_wl().

Referenced by t_LineSave::findline(), IterStart(), lgCheckMonitors(), PrtLineSum(), and save_line().

Here is the call graph for this function:

void prt_line_inlist ( FILE *  ioOUT,
const char *  label,
realnum  wvlng 
)

Definition at line 173 of file prt.cpp.

References fprintf(), NCHLAB, and prt_wl().

Referenced by SaveDo().

Here is the call graph for this function:

void prt_LineLabels ( FILE *  io,
bool  lgPrintAll 
)

prt_LineLabels save all labels and wavelengths for emission line array

Parameters
iofile handle to write output
lgPrintAllprint all if true, if false then do not print parts of transferred lines

Definition at line 112 of file prt.cpp.

References t_LineSave::chHoldComments, DEBUG_ENTRY, fprintf(), t_LineSave::lines, LineSave, and t_LineSave::nsum.

Referenced by SaveDo().

Here is the call graph for this function:

void prt_wl ( FILE *  io,
realnum  wavelength 
)

prt_wl write wavelength to io

Parameters
*io
wavelength

Definition at line 44 of file prt.cpp.

References DEBUG_ENTRY, fprintf(), LineSave, sprt_wl(), and t_LineSave::wl_length.

Referenced by ContBandsCreate(), GetOptLineInt(), diatomics::H2_PunchDo(), iso_radiative_recomb_effective(), lgCheckMonitors(), lines_table(), prt_line_err(), prt_line_inlist(), PrtLinePres(), PrtOneMonitor(), Save1Line(), Save1LineData(), SaveDo(), and SaveSpeciesLines().

Here is the call graph for this function:

void PrtAllTau ( void  )
void PrtColumns ( FILE *  ioMEAN)

PrtColumns print column densities of all elements in standard output

Parameters
ioMEANthis is stream used for io, is stdout when called by final, is save unit when save output generated

Definition at line 14 of file prt_columns.cpp.

References ASSERT, cdColm(), t_elementnames::chElementName, t_elementnames::chElementNameShort, column(), DEBUG_ENTRY, dense, elementnames, fprintf(), h2, diatomics::H2_Prt_column_density(), ipHYDROGEN, t_dense::lgElmtOn, LIMELM, matchGeneric(), MAX2, molcol(), NCHLAB, nWindLine, SDIV(), and TotalInsanity().

Referenced by PrtFinal().

Here is the call graph for this function:

void PrtComment ( void  )

PrtComment analyze model, generating comments on its features

Todo:
2 extend to all iso and elem

Definition at line 66 of file prt_comment.cpp.

References abund, AgeCheck(), t_colden::ajmmin, t_mesh::anu(), ASSERT, atmdat, atoms, bangin(), t_conv::BigEdenError, GrainVar::bin, ca, t_ca::Ca2RmLya, called, caunin(), cdCautions(), cdEXIT, cdLine(), cdNotes(), cdNwcns(), cdReasonGeo(), cdSurprises(), cdWarnings(), t_thermal::chCoolHeatMax, t_dense::chDenseLaw, t_elementnames::chElementName, t_elementnames::chElementNameShort, t_elementnames::chElementSym, chkCaHeps(), chLineLbl(), t_pressure::chLineRadPres, t_conv::chNotConverged, t_StopCalc::chReasonStop, t_warnings::chRgcln, t_input::chTitle, t_rfield::cinrat, t_hydro::cintot, co, t_co::codfrc, t_co::codtot, colden, t_colden::colden, t_colden::colden_old, column(), t_rfield::comtot, t_rfield::ConInterOut, t_thermal::ConstTemp, continuum, conv, t_hmi::CoolH2DexcMax, t_thermal::CoolHeatMax, t_hyperfine::cooling_max, t_dynamics::CoolMax, t_geometry::covaper, t_geometry::covrt, cpu, t_hextra::cryden, GrainVar::dclmax, DEBUG_ENTRY, dense, t_radius::depth, DEPTH_OFFSET, DF_SUBLIMATION, DoppVel, t_rt::DoubleTau, GrainVar::dphmax, dynamics, t_conv::EdenErrorAllowed, t_dense::EdenMax, t_struc::ednstr, elementnames, Wind::emdot, TransitionProxy::Emis(), t_rfield::EnergyBremsThin, EXIT_FAILURE, exp10(), t_conv::failmx, t_iso_sp::fb, t_hydro::fbul, t_geometry::FillFac, t_geometry::filpow, findspecieslocal(), FndLineHt(), t_cpu_i::foundMD5Mismatch(), fprintf(), t_he::frac_he0dest_23S, t_he::frac_he0dest_23S_photo, t_hydro::FracInd, t_thermal::FreeFreeTotHeat, fudgec, t_dense::gas_phase, t_thermal::GBarMax, geometry, GrainVar::GrnElecDonateMax, GrainVar::GrnElecHoldMax, gv, h2, t_hmi::h2dfrc, t_hmi::h2dtot, t_hmi::h2line_cool_frac, t_hmi::h2pmax, t_atmdat::HCharCoolMax, t_atmdat::HCharHeatMax, hcmap, t_hydro::HCollIonMax, he, t_hmi::HeatH2DexcMax, t_thermal::HeatLineMax, t_dynamics::HeatMax, hextra, HFLines, t_atmdat::HIonFracMax, hmi, t_hmi::hmitot, hydro, hyperfine, t_cpu::i(), t_geometry::iEmissPower, t_conv::ifailz, two_photon::induc_dn_max, input, INPUT_LINE_LENGTH, Singleton< t_version >::Inst(), Singleton< module_list >::Inst(), ioPrnErr, ioQQQ, ipCARBON, ipCOL_HTOT, ipH1s, ipH2p, ipH2s, ipH3p, ipH_LIKE, ipHE_LIKE, ipHELIUM, ipHYDROGEN, t_thermal::ipMaxExtra, ipOXYGEN, t_pressure::ipPradMax_line, t_pressure::ipPradMax_nzone, iso_ctrl, iso_sp, iteration, iterations, t_iterations::itermx, t_abund::lgAbnSolar, lgAbort, t_conv::lgAutoIt, t_magnetic::lgB, t_conv::lgBadStop, Wind::lgBallistic(), t_input::lgBracketFound, t_opac::lgCaseB, t_warnings::lgCautns, t_rfield::lgCMB_set, t_rfield::lgComUndr, t_continuum::lgCon0, lgConserveEnergy(), t_continuum::lgCoStarInterpolationCaution, t_isoCTRL::lgCritDensLMix, t_radius::lgCylnOn, t_atmdat::lgdBaseSourceExists, t_abund::lgDepln, t_radius::lgDR2Big, t_radius::lgdR2Small, t_radius::lgDrMinUsed, GrainVar::lgDustOn(), t_dense::lgEdenBad, t_thermal::lgEdnGTcm, t_dense::lgElmtOn, t_fudgec::lgFudgeUsed, t_rfield::lgGamrOK, t_mole_global::lgH2Ozer, t_rfield::lgHabing, t_atmdat::lgHCaseBOK, t_rfield::lgHionRad, t_hydro::lgHiPop2, t_rfield::lgHPhtOK, t_iterations::lgIterAgain, t_iterations::lgLastIt, t_hcmap::lgMapDone, t_hcmap::lgMapOK, t_rt::lgMaserCapHit, t_rt::lgMaserSetDR, t_rfield::lgMMok, GrainVar::lgNegGrnDrg, t_rfield::lgOcc1Hi, t_opac::lgOpacNeg, t_iterations::lgOpticalDepthonverged, t_phycon::lgPhysOK, t_rfield::lgPlasNu, t_pressure::lgPradCap, t_pressure::lgPradDen, t_pressure::lgPres_radiation_ON, lgPrnErr, t_save::lgPunContinuum, t_dynamics::lgRecom, t_dense::lgSetIoniz, t_input::lgSetNoBuffering, t_geometry::lgSphere, Wind::lgStatic(), t_geometry::lgStatic, t_geometry::lgStaticNoIt, t_called::lgTalk, t_thermal::lgTemperatureConstant, lgTestCodeCalled, t_dynamics::lgTimeDependentStatic, t_trace::lgTrace, t_input::lgUnderscoreFound, t_warnings::lgWarngs, Wind::lgWindOK, t_rfield::lgXRayOK, t_geometry::lgZoneSet, t_geometry::lgZoneTrp, LIMELM, t_LineSave::lines, LineSave, t_mole_global::list, module_list::m_l, magnetic, MIN2, mole, mole_global, t_iso_sp::n_HighestResolved_local, t_hydro::nbul, t_iso_sp::nCollapsed_local, t_hydro::ndclev, t_rfield::nflux, t_fudgec::nfudge, NISO, t_hydro::nLyaHot, notein(), t_conv::nTeFail, t_mole_global::num_calc, t_iso_sp::numLevels_local, t_thermal::nUnstable, nWindLine, t_dense::nzEdenBad, t_struc::nzlim, nzone, t_he::nzone, t_hydro::nZTLaMax, t_rfield::occ1nu, t_rfield::occmax, t_rfield::occmnu, opac, oxy, phycon, t_rfield::plsfrqmax, t_oxy::poiii2Max, t_oxy::poiii3Max, t_oxy::poimax, t_hydro::pop2mx, t_thermal::power, powi(), pressure, prt_smooth_predictions(), t_radius::r1r0sq, t_oxy::r4363Max, t_oxy::r5007Max, t_pressure::RadBetaMax, radius, t_radius::Radius, diatomics::renorm_max, diatomics::renorm_min, rfield, t_radius::rinner, t_colden::rjnmin, rt, save, SDIV(), t_secondaries::SecHIonMax, secondaries, ShowMe(), t_isoCTRL::SmallA, SMALLFLOAT, t_mole_local::species, t_opac::stimax, StopCalc, struc, t_opac::TauAbsGeo, EmissionProxy::TauIn(), TauLine2, EmissionProxy::TauTot(), t_rfield::tbr4nu, t_rfield::tbrmax, t_rfield::tbrmnu, t_timesc::tcmptn, t_phycon::te, t_opac::telec, t_hydro::TeLyaMax, t_phycon::TEMP_STOP_DEFAULT, t_StopCalc::TempLoStopZone, t_phycon::TEnerDen, t_struc::testr, thermal, t_thermal::thist, t_opac::thmin, t_timesc::time_therm_long, t_timesc::TimeErode, timesc, t_hydro::TLyaMax, GrainVar::TotalDustHeat, TotalInsanity(), t_thermal::totcol, trace, t_iso_sp::trans(), t_DoppVel::TurbVel, t_iso_sp::TwoNu, t_rfield::uh, warnin(), warnings, wind, Wind::windv, wlAirVac(), t_thermal::wlCoolHeatMax, t_atoms::xMg2Max, and t_warnings::zero().

Referenced by cloudy().

Here is the call graph for this function:

void PrtFinal ( void  )

PrtFinal create final pages of printout, emission line intensities, etc

Definition at line 555 of file prt_final.cpp.

References Wind::AccelAver, Wind::acldr, t_colden::ajmmin, t_mesh::anu(), ASSERT, atmdat, t_conv::AverEdenError, t_conv::AverHeatCoolError, t_conv::AverPressError, t_conv::BigEdenError, t_conv::BigHeatCoolError, t_phycon::BigJumpCO, t_phycon::BigJumpH2, t_phycon::BigJumpne, t_phycon::BigJumpTe, t_conv::BigPressError, GrainVar::bin, called, cap4(), cdB21cm(), cdExecTime(), cdEXIT, cdLine(), cdTemp(), t_input::chCardSav, t_dense::chDenseLaw, t_hydro::chHTopType, t_input::chTitle, t_version::chVersion, colden, t_colden::colden, t_rfield::ConInterOut, conv, t_radius::Conv2PrtInten, t_geometry::covaper, t_geometry::covgeo, DatabasePrintReference(), DEBUG_ENTRY, dense, t_radius::depth_x_fillfac, t_radius::distance, t_colden::dlnenCp, t_colden::dlnenHep, t_colden::dlnenHepp, t_colden::dlnenp, t_rfield::EnergyBremsThin, EXIT_FAILURE, exp10(), t_rfield::extin_mag_B_point, t_rfield::extin_mag_V_extended, t_rfield::extin_mag_V_point, t_iso_sp::fb, t_geometry::FillFac, t_rfield::fine_opac_velocity_width, t_rfield::flux, fp_equal(), fprintf(), t_thermal::FreeFreeTotHeat, t_dense::gas_phase, geometry, gett2(), gett2o3(), gv, t_colden::H0_ov_Tspin, h2, diatomics::H2_itrzn(), HFLines, hmi, hydro, t_geometry::iEmissPower, t_input::InclLevel, input, INPUT_LINE_LENGTH, Singleton< t_version >::Inst(), ioQQQ, ipCOL_HTOT, ipH1s, ipH_LIKE, ipHE_LIKE, ipHELIUM, ipHYDROGEN, ipoint(), ipOXYGEN, t_rt::ipxry, iso_sp, iteration, iterations, t_iterations::itermx, lgAbort, t_conv::lgBadStop, t_warnings::lgCautns, t_radius::lgCylnOn, t_atmdat::lgdBaseSourceExists, GrainVar::lgDustOn(), t_dense::lgElmtOn, t_geometry::lgGeoPP, GrainVar::lgGrainPhysicsOn, t_atmdat::lgHCaseBOK, t_hydro::lgHInducImp, t_iterations::lgIterAgain, t_iterations::lgLastIt, t_radius::lgPredLumin, t_prt::lgPrintBlock, t_prt::lgPrintColumns, t_prt::lgPrintFluxEarth, t_prt::lgPrintTime, t_prt::lgPrtCitations, t_prt::lgPrtShort, t_radius::lgRadiusKnown, t_geometry::lgSizeSet, t_geometry::lgSphere, t_prt::lgSurfaceBrightness, t_prt::lgSurfaceBrightness_SR, t_called::lgTalk, t_rfield::lgUSphON, t_input::lgVisible, t_warnings::lgWarngs, t_LineSave::lines, LineSave, mean, min(), t_rfield::nflux, t_input::nSave, t_LineSave::nsum, t_conv::nTotalIoniz, t_conv::nTotalIoniz_start, t_iso_sp::numLevels_local, nzone, t_colden::OH_ov_Tspin, opac, t_rfield::outlin, t_rfield::outlin_noplot, peimbt, phycon, t_radius::pirsq, POW2, t_thermal::power, pressure, PrintCenterLine(), PrintE71(), PrintE82(), PrintE93(), PrintEfmt, PrintRatio(), PrintSpectrum(), prt, PrtAllTau(), PrtColumns(), PrtMeanIon(), t_rfield::qhtot, t_radius::r1r0sq, t_pressure::RadBetaMax, radius, t_radius::Radius, rfield, t_radius::rinner, t_colden::rjnmin, t_rfield::rstrom, rt, safe_div(), SDIV(), sexp(), t_LineSave::sig_figs, SMALLFLOAT, t_timesc::sound, t_peimbt::t2hstr, t_peimbt::t2hyox, t_peimbt::t2o3str, t_opac::TauAbsGeo, t_rt::tauxry, t_peimbt::tbac, t_peimbt::tbcthn, t_timesc::tcmptn, t_mean::TempEdenMean, t_mean::TempIonEdenMean, t_mean::TempIonMean, t_mean::TempMean, thermal, t_thermal::thist, t_timesc::time_therm_long, t_timesc::TimeErode, timesc, t_thermal::tlowst, t_colden::tmas, t_peimbt::tohyox, t_peimbt::toiiir, TorF(), TotalInsanity(), t_thermal::totcol, totlin(), t_colden::TotMassColl, t_peimbt::tsqden, t_rfield::uh, t_rfield::uheii, t_hmi::UV_Cont_rel2_Draine_DB96_face, t_hmi::UV_Cont_rel2_Habing_TH85_face, warnings, WavlenErrorGet(), t_mesh::widflx(), wind, wlAirVac(), t_colden::wmas, t_dense::wmole, t_mean::xIonMean, t_dense::xMassDensity, and t_dense::xMassTotal.

Referenced by cloudy().

Here is the call graph for this function:

void PrtHeader ( void  )
void PrtLinePres ( FILE *  ioPRESSURE)

PrtLinePres print line radiation pressures for current conditions output goes top openned file handle

Todo:
1 make this and eval rad pressure same routine, with flag saying to print contributors - copy code from other routine - this code has been left behind

Definition at line 16 of file prt_linepres.cpp.

References ASSERT, t_dense::AtomicWeight, chIonLbl(), dBaseSpecies, dBaseTrans, DEBUG_ENTRY, dense, diatoms, fprintf(), frac(), GetDopplerWidth(), HFLines, t_dense::IonHigh, iso_ctrl, iso_sp, LIMELM, MIN2, t_iso_sp::nCollapsed_local, NISO, nLine, nSpecies, t_iso_sp::numLevels_local, nWindLine, t_pressure::pres_radiation_lines_curr, pressure, PressureRadiationLine(), prt_wl(), TransitionList::size(), t_isoCTRL::SmallA, SMALLFLOAT, spsort(), TauLine2, THRESH, t_iso_sp::trans(), and TransitionProxy::WLAng().

Referenced by iter_end_check(), PrtZone(), and SaveDo().

Here is the call graph for this function:

double PrtLineSum ( void  )

PrtLineSum parse print line sum command to enter set of lines into sum

Parameters
chDothe job to do, either " SUM" or "READ"

Definition at line 78 of file prt_linesum.cpp.

References cdEXIT, cdLine_ip(), t_radius::Conv2PrtInten, DEBUG_ENTRY, EXIT_FAILURE, t_LineSave::findline(), fprintf(), ioQQQ, t_LineSave::ipass, ipLine, LineSave, nlsum, nzone, prt_line_err(), radius, strSMLab, and wavelength.

Referenced by lines().

Here is the call graph for this function:

void PrtMeanIon ( char  chType,
bool  lgDensity,
FILE *   
)

PrtMeanIon print mean ionization fractions for all elements, output will go to stream pointed to by argument chTyp is either 'i' or 't' for mean ionization or temperature

Parameters
chType
lgDensitytrue include density, false do not

Definition at line 11 of file prt_meanion.cpp.

References t_elementnames::chElementName, DEBUG_ENTRY, dense, elementnames, fprintf(), geometry, ioQQQ, ipHELIUM, ipHYDROGEN, t_dense::lgElmtOn, t_geometry::lgGeoPP, LIMELM, mean, t_mean::MeanIon(), MIN2, and TotalInsanity().

Referenced by PrtFinal(), and SaveDo().

Here is the call graph for this function:

void prtmet ( void  )

prtmet print all line optical depths at end of iteration

Definition at line 19 of file prt_met.cpp.

References dBaseTrans, DEBUG_ENTRY, dense, diatoms, fprintf(), HFLines, ioQQQ, ipH_LIKE, iso_sp, t_dense::lgElmtOn, t_trace::lgOptcBug, t_prt::lgPrtTau, t_trace::lgTrace, LIMELM, NISO, nSpecies, t_iso_sp::numLevels_local, nWindLine, prme(), prt, prt_header_cols(), TransitionList::size(), TauLine2, trace, and UTALines.

Referenced by PrtAllTau(), and RT_tau_inc().

Here is the call graph for this function:

void PrtZone ( void  )

PrtZone print out individual zone results

Definition at line 34 of file prt_zone.cpp.

References abund, Wind::AccelCont, Wind::AccelGravity, Wind::AccelLine, Wind::AccelTotalOutward, ASSERT, GrainVar::bin, called, t_elementnames::chElementName, t_rfield::cmcool, t_rfield::cmheat, column(), t_ionbal::CompRecoilHeatLocal, conv, t_secondaries::csupra, DEBUG_ENTRY, dense, t_radius::depth_mid_zone, deut, diatoms, t_radius::drad, dynamics, DynaPrtZone(), t_dense::eden, elementnames, t_rfield::EnergyDiffCont, t_rfield::EnergyIncidCont, t_iso_sp::fb, t_geometry::FillFac, findnuclide(), findspecieslocal(), fixit, Wind::fmul, fprintf(), t_deuterium::gas_phase, t_dense::gas_phase, geometry, gv, t_hmi::H2_total, t_hmi::h2dep, t_hmi::h2pdep, t_hmi::h3pdep, t_hydro::H_ion_frac_photo, t_hmi::HD_total, t_thermal::heating(), hmi, t_hmi::hmidep, t_thermal::htot, hydro, ionbal, t_dense::IonHigh, ioQQQ, ipALUMINIUM, ipBERYLLIUM, ipBORON, ipCARBON, ipH1s, ipH_LIKE, ipHe1s1S, ipHe2p1P, ipHe2p3P0, ipHe2p3P1, ipHe2p3P2, ipHe2s1S, ipHe2s3S, ipHe3d1D, ipHe3d3D, ipHe3p1P, ipHe3p3P, ipHe3s1S, ipHe3s3S, ipHE_LIKE, ipHELIUM, ipHYDROGEN, ipLITHIUM, ipNITROGEN, ipOXYGEN, iso_prt_pops(), iso_sp, t_abund::lgAbTaON, t_dynamics::lgAdvection, t_dense::lgDenFlucOn, t_deuterium::lgElmtOn, t_dense::lgElmtOn, GrainVar::lgGrainPhysicsOn, t_prt::lgPrintHeating, Wind::lgStatic(), t_called::lgTalk, t_dynamics::lgTimeDependentStatic, t_thermal::lgUnstable, LIMELM, t_mole_global::list, magnetic, MAX2, mole, mole_global, NISO, t_conv::nPres2Ioniz, t_trace::nTrConvg, t_mole_global::num_calc, nzone, opac, t_pressure::pbeta, phycon, powpq(), t_pressure::pres_radiation_lines_curr, t_pressure::PresGasCurr, pressure, t_magnetic::pressure, t_pressure::PresTotlCurr, PrintE93(), PrintEfmt, prt, PrtLinePres(), radius, t_radius::Radius_mid_zone, rfield, SDIV(), secondaries, t_mole_local::species, t_opac::TauAbsGeo, t_phycon::te, t_hydro::TexcLya, thermal, trace, wind, Wind::windv, t_deuterium::xIonDense, and t_dense::xIonDense.

Referenced by ConvFail(), and iter_end_check().

Here is the call graph for this function:

void SetPrintLineCol ( )

SetPrintLineCol set main line block & wl printing formats

Definition at line 28 of file prt.cpp.

References t_line_col::absint_len, t_line_col::col_gap, t_line_col::col_gap_len, t_line_col::column_len, LineSave, NCHLAB, t_line_col::relint_len, t_line_col::relint_outrange, t_LineSave::sig_figs, and t_LineSave::wl_length.

Referenced by cloudy().

void sprt_wl ( char *  chString,
realnum  wl 
)

sprt_wl write wavelength to string - must be kept parallel with prt_wl

Parameters
*chString
wl

Definition at line 56 of file prt.cpp.

References DEBUG_ENTRY, LineSave, t_LineSave::sig_figs, and t_LineSave::wl_length.

Referenced by TransitionProxy::chLabel(), t_LineSave::findline(), LinSv::label(), lines_continuum(), parse_save_line(), ParseSave(), PrintSpectrum(), prt_wl(), and SaveDo().

Variable Documentation

const long NCOLMAX =132

Definition at line 13 of file prt.h.

Referenced by molcol(), prme(), and prt_header_cols().

t_prt prt
struct t_line_col prt_linecol

Definition at line 15 of file prt.cpp.

Referenced by PrintSpectrum(), prme(), prt_header_cols(), and StuffComment().