This graph shows which files directly or indirectly include this file:

Functions
void	cdInit ()

void	cdTalk (bool)

void	cdOutput (const string &filename="", const char *mode="w")

void	cdOutput (const string &filename, FILE *fp)

void	cdInput (const string &filename="", const char *mode="r")

void	cdDepth_depth (double cdDepth[])

long int	cdnZone ()

double	cdB21cm ()

int	cdRead (const char *)

long	debugLine (realnum wavelength)

void	cdNoExec ()

int	cdDrive ()

void	cdErrors (FILE *)

void	cdNwcns (bool lgAbort, long int NumberWarnings, long int NumberCautions, long int NumberNotes, long int NumberSurprises, long int NumberTempFailures, long int NumberPresFailures, long int NumberIonFailures, long int *NumberNeFailures)

void	cdReasonGeo (FILE *)

void	cdWarnings (FILE *)

void	cdCautions (FILE *)

void	cdSurprises (FILE *)

void	cdNotes (FILE *)

long int	cdLine (const char chLabel, realnum wavelength, double relint, double *absint)

long int	cdLine (const char chLabel, realnum wavelength, double relint, double *absint, int LineType)

void	cdLine_ip (long int ipLine, double relint, double absint, int LineType)

void	cdLine_ip (long int ipLine, double relint, double absint)

int	cdColm (const char , long, double )

double	cdH2_colden (long iVib, long iRot)

void	cdEmis (const char chLabel, realnum wavelength, double emiss, bool lgEmergent)

void	cdEmis_ip (long int ipLine, double *emiss, bool lgEmergent)

double	cdCooling_last ()

double	cdHeating_last ()

double	cdEDEN_last ()

void	cdPressure_last (double TotalPressure, double GasPressure, double *RadiationPressure)

void	cdPressure_depth (double TotalPressure[], double GasPressure[], double RadiationPressure[])

double	cdTemp_last ()

int	cdIonFrac (const char chLabel, long int IonStage, double fracin, const char *chWeight, bool lgDensity)

void	cdVersion (char chString[])

void	cdDate (char chString[])

void	cdSetExecTime ()

double	cdExecTime ()

long int	cdGetLineList (const char chFile[], vector< string > &chLabels, vector< realnum > &wl)

void	cdTimescales (double TTherm, double THRecom, double *TH2)

void	cdSPEC2 (int Option, realnum ReturnedSpectrum[])

int	cdTemp (const char chLabel, long int IonStage, double TeMean, const char *chWeight)

void	cdPrintCommands (FILE *)

void	cdClosePunchFiles ()

long int	cdH2_Line (long int iElecHi, long int iVibHi, long int iRotHi, long int iElecLo, long int iVibLo, long int iRotLo, double relint, double absint)

long	cdMemory ()

Variables
long int	nFeIIBands

long int	nFeIIConBins

realnum **	FeII_Bands

realnum **	FeII_Cont

bool	lgcdInitCalled

Detailed Description

 this file contains definitions for the suite of routines that
 allow the code to be driven as a subroutine.
 These routines set up model parameters, 
 control the execution of Cloudy, and obtain results once complete
 these are the only "public" routines, and only these should
 be accessed when controlling Cloudy

 DRIVING CLOUDY FROM A FORTRAN PROGRAM:
 This should not be too hard - the recommended approach is to use
 the cfortran.h file described at http://www-zeus.desy.de/~burow/cfortran/ 

 A note on return error conditions:

 Many functions return an int to indicate success or failure.
 I try to follow standard Unix/C convention.
 A return value of zero usually indicates that the routine was successful,
 and a non-zero value (not always 1) indicates failure.  This is conventional
 in both C and Unix.  So the way to call Cloudy and test for success is

 if( cdDdrive() )
 {
           printf(" Cloudy failed.\n");
 }

 Although I try to follow this, there ARE exceptions.

Definition in file cddrive.h.

Function Documentation

double cdB21cm ( )

cdB21cm returns B as measured by 21 cm assumes tangled field weighted by n(H0)/T

Definition at line 1270 of file cddrive.cpp.

References DEBUG_ENTRY, mean, SMALLFLOAT, and t_mean::TempB_HarMean.

Referenced by PrtFinal().

void cdCautions ( FILE * )

produces list of cautions

Definition at line 219 of file cddrive.cpp.

References t_warnings::chCaunln, DEBUG_ENTRY, fprintf(), t_warnings::ncaun, and warnings.

Referenced by cdErrors(), PrtComment(), SaveLineIntensity(), SaveResults(), and ShowMe().

Here is the call graph for this function:

void cdClosePunchFiles ( )

wrapper to close all save files

Definition at line 1644 of file cddrive.cpp.

References CloseSaveFiles(), and DEBUG_ENTRY.

Here is the call graph for this function:

int cdColm	(	const char *	,
		long	,
		double *
	)

* cdColm 
* This obtains the column density of a species in the previously computed model.
* The first parameter is a 4 character + NULL terminated string which gives
* the first 4 char of the element name as spelled by Cloudy, either upper or lower case.
* The second parameter is the stage of ionization, 1 for atom, 2 for first ion, etc; 0 is special.
*
* examples: 
* column density of atomic carbon
* cdColm( "carb" , 1 , &col1 );
*
* doubly ionized helium
* cdColm( "heli" , 3 , &col3 );
*
* molecular hydrogen
* cdColm("H2  " , 0 , &col2 );
*
* If the ion stage is zero then the routine will check the first label
* for the values "H2  ", "OH  ", "CO  " and "CII* *", 
* and will return the H2, OH, CO or CII* column density in this case
*
* The column density [cm-2] is returned as the third parameter in all cases
*
* The function returns 0 if it found the species, 1 if it failed

double cdCooling_last ( )

cdCooling_last The returns the total cooling (erg cm^-3 s^-1) for the last computed zone

Definition at line 334 of file cddrive.cpp.

References t_thermal::ctot, and thermal.

void cdDate ( char chString[] )

cdDate The argument is a string with at least 8 char that will receive a null terminated string with the date of the current version of the code.

Definition at line 362 of file cddrive.cpp.

References Singleton< t_version >::Inst().

Here is the call graph for this function:

void cdDepth_depth ( double cdDepth[] )

returns depth structure of previous model

Parameters

cdDepth[]

Definition at line 813 of file cddrive.cpp.

References DEBUG_ENTRY, t_struc::depth, nzone, and struc.

int cdDrive ( )

cdDrive This command actually computes a model. It returns 0 if the calculation was successful, and 1 if an error condition was encountered

Definition at line 81 of file cddrive.cpp.

References cdEXIT, cloudy(), DEBUG_ENTRY, EXIT_FAILURE, fprintf(), grid, grid_do(), InitCoreload(), t_mesh::InitMesh(), input, ioQQQ, lgAbort, lgcdInitCalled, t_grid::lgInsideGrid, t_optimize::lgNoVary, t_optimize::lgOptimr, t_trace::lgTrace, t_optimize::lgVaryOn, t_mesh::ncells(), t_rfield::nflux, t_rfield::nflux_with_check, t_rfield::nPositive, t_input::nSave, optimize, rfield, and trace.

Referenced by cdMain().

Here is the call graph for this function:

double cdEDEN_last ( )

cdEDEN_last return electron density of last zone

Definition at line 389 of file cddrive.cpp.

References dense, and t_dense::eden.

void cdEmis	(	const char *	chLabel,
		realnum	wavelength,
		double *	emiss,
		bool	lgEmergent
	)

cdEmis This routine finds the local emissivity for any line. The first argument is the 4 character (null terminated) label as it appears in the standard output. The second argument is float wavelength as it appears in the standard output. The emissivity (erg /cm^3 /s) is returned as the last parameter. cdEms returns the index of the line in the stack if it was found, the negative of the total number of lines in the stack if it could not find the line

Parameters

*chLabel	4 char null terminated string label
wavelength	line wavelength
*emiss	the vol emissivity of this line in last computed zone
lgEmergent	intrinsic or emergent emissivities

Returns: return value will be index of line within stack

cdEms obtain the local emissivity for a line, for the last computed zone

Definition at line 552 of file cddrive.cpp.

References cdEmis(), DEBUG_ENTRY, t_LineSave::findline(), t_LineSave::lines, and LineSave.

Referenced by cdEmis(), and cdEmis_ip().

Here is the call graph for this function:

void cdEmis_ip	(	long int	ipLine,
		double *	emiss,
		bool	lgEmergent
	)

cdEms_ip obtain the local emissivity for a line with known index

Parameters

ipLine	index of the line in the stack
*emiss	the vol emissivity of this line in last computed zone
lgEmergent	intrinsic or emergent emissivities

Definition at line 570 of file cddrive.cpp.

References ASSERT, cdEmis(), DEBUG_ENTRY, t_LineSave::lines, LineSave, and t_LineSave::nsum.

Referenced by save_line().

Here is the call graph for this function:

void cdErrors ( FILE * )

cdErrors After the calculation is completed, a summary of all error messages can be be generated by calling this routine. The argument is the output file

Parameters

[out] *ioOUT output file

Definition at line 747 of file cddrive.cpp.

References cdCautions(), cdNwcns(), cdWarnings(), t_input::chTitle, DEBUG_ENTRY, fprintf(), and input.

Here is the call graph for this function:

double cdExecTime ( )

cdExecTime returns the elapsed time cpu time (sec) that has elapsed since cdInit called cdSetExecTime.

Definition at line 478 of file cddrive.cpp.

References before, cdClock(), cdEXIT, DEBUG_ENTRY, EXIT_FAILURE, fprintf(), ioQQQ, and lgCalled.

Referenced by cdMain(), PrtFinal(), and SaveDo().

Here is the call graph for this function:

long int cdGetLineList	(	const char	chFile[],
		vector< string > &	chLabels,
		vector< realnum > &	wl
	)

* cdGetLineList will read in a list of emission line labels and wavelengths
* from a file.  I use it for generating LOC grids.  
* Two files (cdGetLineList and cdGetLineList) are included in the main data 
* distribution and have list of strong emission lines for high and low density gas.
* other files can be created by the user.
*
* The first argument is the name of the file to read.
* It it is void ("") then the routine will open LineList_BLR.dat 
*
* The next two arguments are references to vectors holding the
* list of labels and wavelengths.  The routine will allocate the
* needed space, but the vectors are defined in the calling routine.  
* in the calling routine the two variable should be declared like this:
* vector<char*> chLabels;
* vector<realnum> wavelength;
* They would appear as follows in the call to the routine:
* chGetLineList("", chLabels , wavelength );
*
* cdGetLineList returns the number of lines it found in the file if it was successful,
* and -1 if it could not open the file.
*

Definition at line 11 of file cdgetlinelist.cpp.

References AS_LOCAL_DATA_TRY, ASSERT, cdEXIT, LineID::chLabel, DEBUG_ENTRY, EXIT_FAILURE, FILENAME_PATH_LENGTH_2, fprintf(), ioQQQ, lgcdInitCalled, open_data(), read_whole_line(), Parser::setline(), and LineID::wave.

Referenced by lines_table(), and ParseSave().

Here is the call graph for this function:

double cdH2_colden	(	long	iVib,
		long	iRot
	)

cdH2_colden return column density in H2, returns -1 if cannot find state, header is in cdDrive, source in h2.c

Definition at line 2320 of file mole_h2.cpp.

References fprintf(), diatomics::GetXColden(), h2, ioQQQ, diatomics::lgEnabled, diatomics::ortho_colden, and diatomics::para_colden.

Referenced by cdColm(), and lgCheckMonitors().

Here is the call graph for this function:

long int cdH2_Line	(	long int	iElecHi,
		long int	iVibHi,
		long int	iRotHi,
		long int	iElecLo,
		long int	iVibLo,
		long int	iRotLo,
		double *	relint,
		double *	absint
	)

cdH2_Line returns 1 if we found the line, or false==0 if we did not find the line because ortho-para transition or upper level has lower energy than lower level NB - this is in mole_h2_io.c

Parameters

iElecHi	indices for the upper level
iVibHi	indices for the upper level
iRotHi	indices for the upper level
iElecLo	indices for lower level
iVibLo	indices for lower level
iRotLo	indices for lower level
*relint	linear intensity relative to normalization line
*absint	log of luminosity or intensity of line

Definition at line 1899 of file mole_h2_io.cpp.

References DEBUG_ENTRY, diatomics::getLine(), and h2.

Here is the call graph for this function:

double cdHeating_last ( )

cdHeating_last returns the total heating (erg cm^-3 s^-1) for the last computed zone

Definition at line 376 of file cddrive.cpp.

References t_thermal::htot, and thermal.

void cdInit ( )

cdInit This routine must be called before any of the others - it reinitializes many variables, and must be called before any of the other routines. In a large grid of calculations it must be repeatedly called before the start of the new calculation and after all results have been obtained from the previous model

Definition at line 46 of file cdinit.cpp.

References called, cdSetExecTime(), t_input::chCardSav, t_input::chCardStrip, cpu, DEBUG_ENTRY, fprintf(), grid, t_cpu::i(), input, ioQQQ, lgBigBotch, t_input::lgBracketFound, lgcdInitCalled, t_input::lgDeprecatedComment, t_grid::lgGrid, t_input::lgInitPresent, lgMonitorsOK, t_cpu_i::lgMPI_talk(), t_optimize::lgNoVary, t_optimize::lgOptimr, t_grid::lgOutputTypeOn, lgPrtSciNot, t_called::lgTalk, t_called::lgTalkForcedOff, t_called::lgTalkIsOK, t_input::lgUnderscoreFound, t_optimize::lgVaryOn, t_grid::nGridCommands, NKRD, t_input::nRead, t_input::nSave, NUM_OUTPUT_TYPES, optimize, TotalInsanity(), and zero().

Referenced by cdMain().

Here is the call graph for this function:

void cdInput	(	const string &	filename = `""`,
		const char *	mode = `"r"`
	)

cdInput This tells the code where to get input. The arguments are as for the stdio.h fopen call, but the resulting file pointer is checked for validity. All further input will come from this file. If filename = "", input is switched to stdin (and mode is ignored). If this routine is not called then all input will come from stdin, the standard c input

Definition at line 1232 of file cddrive.cpp.

References AS_LOCAL_ONLY_TRY, cdEXIT, DEBUG_ENTRY, ES_FAILURE, fprintf(), ioQQQ, ioStdin, and open_data().

Referenced by cdMain(), and cdPrepareExit().

Here is the call graph for this function:

int cdIonFrac	(	const char *	chLabel,
		long int	IonStage,
		double *	fracin,
		const char *	chWeight,
		bool	lgDensity
	)

 * cdIonFrac
 * This returns the ionization fraction for any element included in the calculation. 
 * The first parameter is 4 char null terminated string giving the first 4 letters of
 * element name as spelled by Cloudy.  
 * The second parameter is an integer giving the ionization stage, 
 * 1 for atom, 2 for first ion, etc.
 * The third parameter returns the predicted ionization fraction of that ion stage.
 * The last parameter is an 8 character + null string that says either "volume" or "radius",
 * to specify whether the average should be weighted by volume or radius.
 * The return value is 0 if the routine could find the species and
 * non-zero if it failed to find the element

Parameters

*chLabel	four char string, null terminated, giving the element name
IonStage	IonStage is ionization stage, 1 for atom, up to N+1 where N is atomic number
*fracin	will be fractional ionization
*chWeight	how to weight the average, must be "VOLUME" or "RADIUS"
lgDensity	if true then weighting also has electron density, if false then only volume or radius

Definition at line 909 of file cddrive.cpp.

References caps(), t_elementnames::chElementNameShort, DEBUG_ENTRY, elementnames, exp10(), fprintf(), INPUT_LINE_LENGTH, ioQQQ, ipHYDROGEN, LIMELM, mean, t_mean::MeanIon(), and trimTrailingWhiteSpace().

Referenced by DynaPunchTimeDep(), lgCheckMonitors(), and save_average().

Here is the call graph for this function:

long int cdLine	(	const char *	chLabel,
		realnum	wavelength,
		double *	relint,
		double *	absint
	)

cdLine This routine finds the predicted intensity of any line in the standard output.

Parameters

*chLabel	1st parameter is the 4-char label + null terminated label, as it appears in the output.
wavelength	2nd parameter is the float wavelength in Angstroms, not how it appears in printout. The first four digits must agree with the number in the printout, but the units must be Angstroms. 3rd parameter is the predicted intensity relative to the normalization line. 4th par is the log of the predicted luminosity or intensity of the line (ergs).
*relint	5th is pointer to relative intensity, a double that is returned
*absint	6th is pointer to log of absolute intensity
lEmergent	- emergent or intrinsic intensity

Returns: return value: The routine returns an index (>0) of the array element within stack if it finds the line, It returns the negative of the total number of lines if it could not find the line. (this is a debugging aid) note that this returns a long int since there are LOTS of lines this also IS NOT the standard C convention for success or failure

Definition at line 1067 of file cddrive.cpp.

References cdLine(), and DEBUG_ENTRY.

Referenced by cdLine(), ConvIterCheck(), Drive_cdLine(), IterStart(), lgCheckMonitors(), lines(), PrtComment(), PrtFinal(), and SaveDo().

Here is the call graph for this function:

long int cdLine	(	const char *	chLabel,
		realnum	wavelength,
		double *	relint,
		double *	absint,
		int	LineType
	)

Definition at line 1080 of file cddrive.cpp.

References cdLine_ip(), DEBUG_ENTRY, t_LineSave::findline(), and LineSave.

Here is the call graph for this function:

void cdLine_ip	(	long int	ipLine,
		double *	relint,
		double *	absint,
		int	LineType
	)

cdLine_ip get the predicted line intensity, using index for line in stack

Parameters

ipLine
*relint	linear intensity relative to normalization line
*absint	log of luminosity or intensity of line
lgEmergent	- intrinsic or emergent intensity

Definition at line 1120 of file cddrive.cpp.

References ASSERT, t_radius::Conv2PrtInten, DEBUG_ENTRY, fprintf(), ioQQQ, t_LineSave::ipNormWavL, t_LineSave::lines, LineSave, t_LineSave::nsum, radius, and t_LineSave::ScaleNormLine.

Here is the call graph for this function:

void cdLine_ip	(	long int	ipLine,
		double *	relint,
		double *	absint
	)

Definition at line 1110 of file cddrive.cpp.

References cdLine_ip(), and DEBUG_ENTRY.

Referenced by cdLine(), cdLine_ip(), lgCheckMonitors(), PrtLineSum(), and save_line().

Here is the call graph for this function:

long cdMemory ( )

Definition at line 503 of file cddrive.cpp.

References cdEXIT, EXIT_FAILURE, fprintf(), and ioQQQ.

Referenced by cdMain().

Here is the call graph for this function:

void cdNoExec ( )

cdNoExec This provides option to have the code prepare the initial conditions for a model, but not actually try to compute the model. I use this when setting up a large grid so that I can quickly run through the full grid as a check that the commands are entered properly and the parameters I am going to vary do so properly. The command is then commented out when the grid is properly set up.

Definition at line 403 of file cddrive.cpp.

References DEBUG_ENTRY, t_noexec::lgNoExec, and noexec.

void cdNotes ( FILE * )

produces list of Notes

Definition at line 310 of file cddrive.cpp.

References t_warnings::chNoteln, DEBUG_ENTRY, fprintf(), t_warnings::nnote, and warnings.

Referenced by PrtComment().

Here is the call graph for this function:

void cdNwcns	(	bool *	lgAbort,
		long int *	NumberWarnings,
		long int *	NumberCautions,
		long int *	NumberNotes,
		long int *	NumberSurprises,
		long int *	NumberTempFailures,
		long int *	NumberPresFailures,
		long int *	NumberIonFailures,
		long int *	NumberNeFailures
	)

cdNwcns This command returns the number of warnings, cautions, notes, surprises, assorted types of failures found the last computed model

Parameters

*lgAbort	abort status, if non-zero then big problems happened
*NumberWarnings	the number of warnings
*NumberCautions	the number of cautions
*NumberNotes	the number of notes
*NumberSurprises	the number of surprises
*NumberTempFailures	the number of temperature convergence failures
*NumberPresFailures	the number of pressure convergence failures
*NumberIonFailures	the number of ionization convergence failures
*NumberNeFailures	the number of electron density convergence failures

Definition at line 1173 of file cddrive.cpp.

References conv, DEBUG_ENTRY, lgAbort, t_warnings::nbang, t_warnings::ncaun, t_conv::nIonFail, t_conv::nNeFail, t_warnings::nnote, t_conv::nPreFail, t_conv::nTeFail, t_warnings::nwarn, and warnings.

Referenced by cdErrors(), cdMain(), and PrtComment().

long int cdnZone ( )

cdnZone returns number of zones

Definition at line 886 of file cddrive.cpp.

References nzone.

void cdOutput	(	const string &	filename = `""`,
		const char *	mode = `"w"`
	)

cdOutput This tells the code where to send output. The arguments are as for the stdio.h fopen call, but the resulting file pointer is checked for validity. All further log output will go to this file. If filename = "", output is switched to stdout (and mode is ignored). If this routine is not called then all output will go to stdout, the standard c output

Definition at line 1209 of file cddrive.cpp.

References AS_LOCAL_ONLY, t_save::chOutputFile, DEBUG_ENTRY, ioQQQ, open_data(), and save.

Referenced by cdMain(), and cdPrepareExit().

Here is the call graph for this function:

void cdOutput	(	const string &	filename,
		FILE *	fp
	)

Definition at line 1222 of file cddrive.cpp.

References t_save::chOutputFile, DEBUG_ENTRY, ioQQQ, and save.

void cdPressure_depth	(	double	TotalPressure[],
		double	GasPressure[],
		double	RadiationPressure[]
	)

cdPressure_depth This returns the pressure and its constituents for the last iteration. space was allocated in the calling routine for the vectors - before calling this, cdnZone should have been called to get the number of zones, then space allocated for the arrays

Parameters

TotalPressure[]	total pressure, all forms
GasPressure[]	gas pressure
RadiationPressure[]	radiation pressure

Definition at line 838 of file cddrive.cpp.

References DEBUG_ENTRY, t_struc::GasPressure, nzone, t_struc::pres_radiation_lines_curr, t_struc::pressure, and struc.

void cdPressure_last	(	double *	TotalPressure,
		double *	GasPressure,
		double *	RadiationPressure
	)

cdPressure_last

This returns the pressure and its constituents for the last computed zone.

Parameters

*TotalPressure	total pressure, all forms
*GasPressure	gas pressure
*RadiationPressure	radiation pressure

Definition at line 865 of file cddrive.cpp.

References DEBUG_ENTRY, t_pressure::pres_radiation_lines_curr, t_pressure::PresGasCurr, pressure, and t_pressure::PresTotlCurr.

void cdPrintCommands ( FILE * )

cdPrintCommands( FILE *) This routine prints all input commands into file whose handle is the argument

Parameters

*ioOUT [out] output file handle

Definition at line 527 of file cddrive.cpp.

References t_input::chCardSav, fprintf(), t_input::InclLevel, input, and t_input::nSave.

Referenced by ShowMe().

Here is the call graph for this function:

int cdRead ( const char * )

cdRead This sends commands to the code. The normal set of commands described in Part I of Hazy must be entered into a null-terminated string. These strings are then fed to Cloudy with this command. The function returns the number of commands that can still be entered before the command stack is full. The code will stop if you try to continue giving it commands after the command has returned zero. This return value is the opposite of the standard - a non-zero return is normal

Definition at line 1466 of file cddrive.cpp.

References AS_SILENT_TRY, cdEXIT, t_input::chCardSav, t_input::chCardStrip, t_save::chOutputFile, t_input::curInclLevel, DEBUG_ENTRY, EXIT_FAILURE, exp10(), fprintf(), Parser::getNumberDefault(), grid, Parser::hasCommand(), t_input::InclLevel, input, INPUT_LINE_LENGTH, ioQQQ, lgcdInitCalled, t_grid::lgGrid, t_input::lgInitPresent, lgIsCommentSeq(), t_optimize::lgNoVary, t_optimize::lgOptimr, t_prt::lgPrintTime, t_input::lgSetNoBuffering, t_trace::lgTrace, t_optimize::lgVaryOn, min(), t_grid::nGridCommands, NKRD, Parser::nMatch(), t_input::nSave, open_data(), optimize, ParseInit(), prt, rfield, save, Parser::setline(), t_mesh::setResolutionScaleFactor(), StripComment(), and trace.

Referenced by cdMain(), and ParseInit().

Here is the call graph for this function:

void cdReasonGeo ( FILE * )

This prints the reason why the model stopped, and the model geometry, on the io file pointed to by the file handle

Definition at line 170 of file cddrive.cpp.

References t_warnings::chRgcln, DEBUG_ENTRY, fprintf(), and warnings.

Referenced by PrtComment().

Here is the call graph for this function:

void cdSetExecTime ( )

normally called by cdInit, this routine sets initial variables for times

Definition at line 471 of file cddrive.cpp.

References before, cdClock(), and lgCalled.

Referenced by cdInit().

Here is the call graph for this function:

void cdSPEC2	(	int	Option,
		realnum	ReturnedSpectrum[]
	)

this routine returns the spectrum needed for Keith Arnaud's XSPEC X-Ray analysis code. It should be called after cdDrive has successfully computed a model. The calling routine must ensure that the vectors have enough space to store the resulting spectrum, given the bounds and energy resolution

Parameters

Option

the type of spectrum to be returned (in photons/s/bin)
      0 the total continuum, all components outward and reflected
     
      1 the incident continuum
     
      2 the attenuated incident continuum
      3 the reflected incident continuum
     
      4 diffuse emission, lines + continuum, outward
      5 diffuse emission, lines + continuum, reflected
     
      6 diffuse continuous emission, outward
      7 diffuse continuous emission, reflected
     
      8 total transmitted, incident + lines and continuum
      9 total reflected, incident + lines and continuum
     
     10 exp(-tau) to the illuminated face

ReturnedSpectrum[] the returned spectrum, should have rfield.nflux elements

Definition at line 148 of file save_do.cpp.

References t_mesh::anu2(), ASSERT, cdEXIT, CT_INCI, CT_OUTW_DIFF, CT_OUTW_INCI, CT_OUTW_LIN, CT_REFL_DIFF, CT_REFL_INCI, CT_REFL_LIN, DEBUG_ENTRY, EXIT_FAILURE, t_opac::ExpmTau, flxCell(), fprintf(), t_rfield::getCoarseTransCoef(), ioQQQ, t_rfield::nflux, opac, t_radius::PI4_rinner_sq, radius, rfield, and t_mesh::widflx().

Referenced by GridRetrieveXSPECData(), and punchFITS_GenericData().

Here is the call graph for this function:

void cdSurprises ( FILE * )

produces list of surprises

Definition at line 274 of file cddrive.cpp.

References broke, t_warnings::chBangln, DEBUG_ENTRY, fprintf(), Singleton< FixitList >::Inst(), t_broke::lgPrintFixits, FixitList::list, t_warnings::nbang, and warnings.

Referenced by PrtComment().

Here is the call graph for this function:

void cdTalk ( bool )

cdTalk tells the code whether or not to produce any of its normal output, If the argument is true (or if it is not called at all) it produces output, produces no output if it is false

Definition at line 1257 of file cddrive.cpp.

References called, cpu, DEBUG_ENTRY, t_cpu::i(), t_cpu_i::lgMPI_talk(), t_called::lgTalk, and t_called::lgTalkForcedOff.

Here is the call graph for this function:

int cdTemp	(	const char *	chLabel,
		long int	IonStage,
		double *	TeMean,
		const char *	chWeight
	)

cdTemp

* This routine finds the mean electron temperature for any ionization stage 
* It returns 0 if it could find the species, 1 if it could not find the species.
* The first argument is a null terminated 4 char string that gives the element
* name as spelled by Cloudy.  
* The second argument is ion stage, 1 for atom, 2 for first ion, etc
* This third argument will be returned as result,
* Last parameter is either "VOLUME" or "RADIUS" to give weighting 
*
* if the ion stage is zero then the element label will have a special meaning.
* The string "21CM" is will return the 21 cm temperature.
* The string "H2  " will return the temperature weighted wrt the H2 density

Parameters

*chLabel	four char string, null terminated, giving the element name
IonStage	IonStage is ionization stage, 1 for atom, up to N+1 where N is atomic number
*TeMean	will be temperature
*chWeight	how to weight the average, must be "VOLUME" or "RADIUS"

Todo:: 2 this should have a last argument like cdIonFrac for whether or not weighting is wrt electron density

Definition at line 1311 of file cddrive.cpp.

References caps(), t_elementnames::chElementNameShort, DEBUG_ENTRY, elementnames, TransitionProxy::Emis(), TransitionList::Emis(), exp10(), fprintf(), HFLines, INPUT_LINE_LENGTH, ioQQQ, ipH1s, ipH2p, ipH_LIKE, ipHYDROGEN, iso_sp, LIMELM, mean, t_mean::MeanIon(), SMALLFLOAT, EmissionProxy::TauCon(), t_mean::TempEdenMean, t_mean::TempH_21cmSpinMean, t_mean::TempHarMean, t_mean::TempIonMean, t_mean::TempMean, t_iso_sp::trans(), and trimTrailingWhiteSpace().

Referenced by DynaPunchTimeDep(), lgCheckMonitors(), optimize_func(), PrtFinal(), and save_average().

Here is the call graph for this function:

double cdTemp_last ( )

cdTemp_last returns the temperature of the last zone on last iteration

Definition at line 898 of file cddrive.cpp.

References phycon, and t_phycon::te.

void cdTimescales	(	double *	TTherm,
		double *	THRecom,
		double *	TH2
	)

cdTimescales returns the longest thermal, recombination, and H2 formation timescales that occurred in the previous model

Parameters

*TTherm	the thermal cooling timescale
*THRecom	the hydrogen recombination timescale
*TH2	the H2 formation timescale

Definition at line 242 of file cddrive.cpp.

References DEBUG_ENTRY, MAX2, t_timesc::time_H2_Dest_longest, t_timesc::time_H2_Form_longest, t_timesc::time_Hrecom_long, t_timesc::time_therm_long, and timesc.

void cdVersion ( char chString[] )

cdVersion The argument is a string with at least 8 characters that will receive a null terminated string with the version number of the code.

Definition at line 347 of file cddrive.cpp.

References Singleton< t_version >::Inst().

Here is the call graph for this function:

void cdWarnings ( FILE * )

These routines produce lists of warnings, cautions, notes, surprises These are the routines that are called by cdErrors. Normally cdErrors and not these routines would be called by the user.

Definition at line 192 of file cddrive.cpp.

References t_warnings::chWarnln, DEBUG_ENTRY, fprintf(), t_warnings::nwarn, and warnings.

Referenced by cdErrors(), optimize_func(), PrtComment(), SaveLineIntensity(), SaveResults(), and ShowMe().

Here is the call graph for this function:

long debugLine ( realnum wavelength )

debugLine provides a debugging hook into the main line array loops over whole array and finds every line that matches length, the wavelength, the argument to the function put breakpoint inside if test return value is number of matches, also prints all matches

Parameters

[in]	the	emission line wavelength
[out]	the	number of matches

Definition at line 1032 of file cddrive.cpp.

References t_LineSave::lines, LineSave, t_LineSave::nsum, t_LineSave::sig_figs, wavelength, and WavlenErrorGet().

Here is the call graph for this function:

Variable Documentation

realnum** FeII_Bands

FeII.bands[n][3], where n is the number of bands in fe2bands.dat these bands are defined in fe2bands.dat and read in at startup of calculation

realnum** FeII_Cont

FeII_Cont[n][3], where n is the number of cells needed these bands are defined in cdGetFeIIBands

bool lgcdInitCalled

this is the value that will be set true when cdInit is called. Other routines will check that this is true when they are called, to verify that cdInit was called first. Definition is in cdInit.cpp

Definition at line 27 of file cdinit.cpp.

Referenced by cdDrive(), cdGetLineList(), cdInit(), and cdRead().

long int nFeIIBands

this is the number of bands read in from FeII_bands.ini

long int nFeIIConBins

number of bands in continuum array

Functions

Variables

Detailed Description

Function Documentation

Variable Documentation