cloudy
trunk
|
#include <grainvar.h>
Public Member Functions | |
ChargeBin () | |
~ChargeBin () | |
void | clear () |
Data Fields | |
long | DustZ |
long | ipThresInf |
long | ipThresInfVal |
long | nfill |
double | FracPop |
double | Emin |
double | EminInc |
double | PotSurf |
double | PotSurfInc |
double | ThresInf |
double | ThresInfInc |
double | ThresInfVal |
double | ThresSurf |
double | ThresSurfInc |
double | ThresSurfVal |
double | ThermRate |
flex_arr< realnum > | yhat |
flex_arr< realnum > | yhat_primary |
flex_arr< realnum > | ehat |
flex_arr< double > | cs_pdt |
long | RecomZ0 [LIMELM][LIMELM+1] |
double | eta [LIMELM+2] |
double | xi [LIMELM+2] |
double | RSum1 |
double | RSum2 |
double | ESum1a |
double | ESum1b |
double | ESum2 |
realnum | tedust |
double | hcon1 |
double | hots1 |
double | bolflux1 |
double | pe1 |
flex_arr< double > | fac1 |
flex_arr< double > | fac2 |
realnum | RecomEn [LIMELM][LIMELM+1] |
realnum | ChemEn [LIMELM][LIMELM+1] |
double | BolFlux |
double | GrainHeat |
double | GrainHeatColl |
double | GasHeatPhotoEl |
double | GasHeatTherm |
double | GrainCoolTherm |
double | ChemEnIon |
double | ChemEnH2 |
double | HeatingRate2 |
Private Member Functions | |
void | p_clear0 () |
void | p_clear1 () |
NB NB NB NB NB NB
this is the data structure for all grain data that depends on the charge state (i.e. all data that used to have an [NCHS] dependance in days of old),
each data item will be referenced as: gv.bin[nd]->chrg[nz]->data_item
this structure is allocated for each charge state at run time.
Data items that do not depend on charge state, or are summed over all charge states, should go in gv or gv.bin[nd] below !!
NB NB !! every field that is in ChargeBin should be initialized or invalidated in UpdatePot1/2 !! NB NB
Definition at line 203 of file grainvar.h.
|
inline |
Definition at line 209 of file grainvar.h.
References p_clear1().
|
inline |
Definition at line 213 of file grainvar.h.
References p_clear0().
|
inline |
Definition at line 217 of file grainvar.h.
References p_clear0(), and p_clear1().
|
private |
Definition at line 228 of file grains.cpp.
References flex_arr< T, lgBC >::clear(), cs_pdt, ehat, fac1, fac2, yhat, and yhat_primary.
Referenced by clear(), and ~ChargeBin().
|
private |
Definition at line 238 of file grains.cpp.
References DustZ, FracPop, nfill, and tedust.
Referenced by ChargeBin(), and clear().
double ChargeBin::BolFlux |
heating/cooling balance, all entries are valid for current zone, actual depl, and are in erg/cm^3/s total photon flux absorbed, used for energy conservation test
Definition at line 269 of file grainvar.h.
double ChargeBin::bolflux1 |
reminder of heating integral over all fields, Ryd/H/s at default depl
Definition at line 260 of file grainvar.h.
Referenced by GrainTemperature().
net contribution of ion recomb to grain heating, in Ryd
Definition at line 266 of file grainvar.h.
Referenced by GrainCollHeating().
double ChargeBin::ChemEnH2 |
net amount of energy donated by H2 formation on grain surface
Definition at line 269 of file grainvar.h.
double ChargeBin::ChemEnIon |
net amount of energy donated by recombining ions
Definition at line 269 of file grainvar.h.
flex_arr<double> ChargeBin::cs_pdt |
photo-detachment cross section, for default depl
Definition at line 243 of file grainvar.h.
Referenced by GrainElecEmis1(), GrainTemperature(), GrainUpdateRadius2(), p_clear0(), and PE_init().
long ChargeBin::DustZ |
grain charging grain charge, in e
Definition at line 224 of file grainvar.h.
Referenced by GrainCollHeating(), GrainElecEmis1(), GrainTemperature(), GrainUpdateRadius2(), p_clear1(), PE_init(), and qheat_init().
average energy per photo-electron (incl. Auger and secondary electrons), Ryd
Definition at line 242 of file grainvar.h.
Referenced by p_clear0(), PE_init(), and qheat_init().
double ChargeBin::Emin |
negative threshold to be overcome by outgoing electron, in Ryd
Definition at line 228 of file grainvar.h.
double ChargeBin::EminInc |
same as Emin, but for incoming electrons (using Zg instead of Zg+1), in Ryd
Definition at line 228 of file grainvar.h.
double ChargeBin::ESum1a |
cache for PE rate from band and inner shells (incl. Auger elec. & secondaries)
Definition at line 252 of file grainvar.h.
Referenced by GrainElecEmis1().
double ChargeBin::ESum1b |
cache for PE rate from conduction band
Definition at line 253 of file grainvar.h.
Referenced by GrainElecEmis1().
double ChargeBin::ESum2 |
cache for electron loss due to recombination with colliding ions
Definition at line 254 of file grainvar.h.
Referenced by GrainElecEmis1().
double ChargeBin::eta[LIMELM+2] |
cache for GrainScreen results
Definition at line 247 of file grainvar.h.
flex_arr<double> ChargeBin::fac1 |
auxiliary data for GrainTemperature
Definition at line 262 of file grainvar.h.
Referenced by GrainTemperature(), p_clear0(), and qheat_init().
flex_arr<double> ChargeBin::fac2 |
auxiliary data for GrainTemperature
Definition at line 263 of file grainvar.h.
Referenced by GrainTemperature(), and p_clear0().
double ChargeBin::FracPop |
fractional population for lower and upper charge state
Definition at line 228 of file grainvar.h.
Referenced by GrainChrgTransferRates(), GrainCollHeating(), GrainTemperature(), GrainUpdateRadius2(), p_clear1(), and qheat_init().
double ChargeBin::GasHeatPhotoEl |
photoelectric heating of the gas, added in GrGH 0
Definition at line 269 of file grainvar.h.
double ChargeBin::GasHeatTherm |
heating due to thermionic emission
Definition at line 269 of file grainvar.h.
double ChargeBin::GrainCoolTherm |
grain cooling due to thermionic emissions, summed over charge states
Definition at line 269 of file grainvar.h.
double ChargeBin::GrainHeat |
total heating of current grain type
Definition at line 269 of file grainvar.h.
double ChargeBin::GrainHeatColl |
collisional heating of current grain type
Definition at line 269 of file grainvar.h.
double ChargeBin::hcon1 |
reminder of heating integral over incident flux, Ryd/H/s at default depl
Definition at line 258 of file grainvar.h.
Referenced by GrainTemperature().
double ChargeBin::HeatingRate2 |
quantum heating quantum heating by electron recomb - thermionic cooling, erg/H/s, default depl
Definition at line 279 of file grainvar.h.
Referenced by GrainCollHeating(), and qheat_init().
double ChargeBin::hots1 |
reminder of heating integral over diffuse fields, Ryd/H/s at default depl
Definition at line 259 of file grainvar.h.
Referenced by GrainTemperature().
long ChargeBin::ipThresInf |
pointer to ThresInf in anu array
Definition at line 224 of file grainvar.h.
Referenced by GrainElecEmis1(), GrainTemperature(), GrainUpdateRadius2(), PE_init(), and qheat_init().
long ChargeBin::ipThresInfVal |
pointer to ThresInfVal in anu array
Definition at line 224 of file grainvar.h.
Referenced by GrainElecEmis1(), PE_init(), and qheat_init().
long ChargeBin::nfill |
remember how far the flex_arr's were filled in
Definition at line 224 of file grainvar.h.
Referenced by p_clear1(), and qheat_init().
double ChargeBin::pe1 |
reminder of photoelectric heating integral, Ryd/H/s at default depl
Definition at line 261 of file grainvar.h.
Referenced by GrainTemperature().
double ChargeBin::PotSurf |
potential difference between grain surface and infinity (phi_g), in Ryd
Definition at line 228 of file grainvar.h.
Referenced by GrainCollHeating(), GrainTemperature(), PE_init(), and qheat_init().
double ChargeBin::PotSurfInc |
same as PotSurf, but for incoming electrons (using Zg instead of Zg+1), in Ryd
Definition at line 228 of file grainvar.h.
Referenced by GrainCollHeating(), and qheat_init().
chemical energy released into grain upon impact, in Ryd
Definition at line 265 of file grainvar.h.
Referenced by GrainCollHeating().
ionization stage the atom/ion recombines to upon impact
Definition at line 245 of file grainvar.h.
Referenced by GrainChrgTransferRates(), GrainCollHeating(), and GrainElecEmis1().
double ChargeBin::RSum1 |
cache for electron gain from colliding electrons
Definition at line 250 of file grainvar.h.
double ChargeBin::RSum2 |
cache for electron gain from colliding ions
Definition at line 251 of file grainvar.h.
realnum ChargeBin::tedust |
grain heating equilibrium temperature for this zone
Definition at line 257 of file grainvar.h.
Referenced by p_clear1().
double ChargeBin::ThermRate |
thermionic rate, in e/cm^2/s
Definition at line 228 of file grainvar.h.
Referenced by GrainTemperature().
double ChargeBin::ThresInf |
threshold for removing electron from grain well to infinity (phi), in Ryd
Definition at line 228 of file grainvar.h.
double ChargeBin::ThresInfInc |
same as ThresInf, but for incoming electrons (using Zg instead of Zg+1), in Ryd
Definition at line 228 of file grainvar.h.
Referenced by qheat_init().
double ChargeBin::ThresInfVal |
threshold for removing electron from valence band to infinity (phi^v), in Ryd
Definition at line 228 of file grainvar.h.
double ChargeBin::ThresSurf |
threshold for removing electron from grain well to surface (phi_s), in Ryd
Definition at line 228 of file grainvar.h.
Referenced by GrainTemperature(), PE_init(), and qheat_init().
double ChargeBin::ThresSurfInc |
same as ThresSurf, but for incoming electrons (using Zg instead of Zg+1), in Ryd
Definition at line 228 of file grainvar.h.
Referenced by GrainCollHeating().
double ChargeBin::ThresSurfVal |
threshold for removing electron from valence band to surface (phi_s^v), in Ryd
Definition at line 228 of file grainvar.h.
Referenced by PE_init(), and qheat_init().
double ChargeBin::xi[LIMELM+2] |
cache for GrainScreen results
Definition at line 247 of file grainvar.h.
electron yield per absorbed photon (incl. Auger and secondary electrons)
Definition at line 240 of file grainvar.h.
Referenced by GrainElecEmis1(), p_clear0(), PE_init(), and qheat_init().
electron yield per absorbed photon (only primary electrons)
Definition at line 241 of file grainvar.h.
Referenced by p_clear0(), and qheat_init().